PEX PEX-EVOH PIPE

English
>
CPVC stands for chlorinated polyvinyl chloride. It is a thermoplastic pipe for hot and cold water applications. CPVC pipes are made from chlorine treated PVC to make it more heat and corrosion resistant. CPVC pipes are available in sizes ranging from 1/2" to 4" in diameter.
CPVC pipes are used in a variety of plumbing and industrial applications. It is often used in residential plumbing as a replacement for copper pipes. It is also used in commercial and industrial settings for various purposes such as carrying chemicals and other liquids.
CPVC pipe is a type of plastic pipe used in plumbing applications. CPVC pipes are made of chlorinated PVC resin and are suitable for hot water applications. CPVC pipes are available in sizes ranging from 1/2" to 4". CPVC is a plastic pipe made of PVC resin. It is used in plumbing and electrical conduit applications. CPVC is strong and durable, but can be challenging to use.
1. Material properties
CPVC pipes are mainly made of PVC-C resin with excellent heat resistance and insulation properties. CPVC products are recognized as green and environmentally friendly products, and their excellent physical and chemical properties are increasingly being valued by the industry.
CPVC pipe is a hard straight solid wall pipe, the inner and outer walls are smooth and flat, the color is orange-red, the color is bright and eye-catching.
2. Heat resistance
Compared with the ordinary UPVC double-wall corrugated pipe, the heat-resistant temperature of the CPVC pipe is increased by 15 °C, and it can maintain no deformation under the environment above 93 °C, and has sufficient strength.
3. Insulation performance
CPVC power pipes can withstand high voltages of more than 30,000 volts.
4. Compression resistance
After material modification of the CPVC power pipe, the ring stiffness of the product reaches 1Okpa, which is significantly higher than the relevant national department's regulations for buried plastic pipes, whose ring stiffness should be above 8kpa.
5. High impact strength
The CPVC power pipe can withstand the impact force of 1kg heavy hammer and 2m height at the temperature of 0 ℃, which fully reflects the low temperature impact performance of the material, which is fully applicable to the requirements of the construction environment.
6. Flame retardant properties
Both PVC and PVC-C materials have good flame retardant properties and can be extinguished immediately after leaving the fire. Especially PVC-C material, because its chlorine content is significantly higher than that of PVC, the flame retardancy and smoke density index are more significantly improved.
7. Installation performance
The CPVC pipe is light in weight, high in strength, and simple in construction and laying method. It can realize excavation and burying at night, backfill the road surface, and open to traffic during the day. It adopts elastic sealing rubber ring socket-type connection, which is convenient and fast for installation and connection, and has good connection and sealing performance. Prevent the leakage of groundwater and effectively protect the safe use of power cables.
8. Long service life
CPVC power pipe material is corrosion-resistant, anti-aging, and has a service life of more than 50 years.
CPVC pipe is a type of plastic pipe used for hot and cold water applications. It is made of chlorinated PVC resin, making it more heat and corrosion resistant.
CPVC pipes are available in sizes from 1/2" to 4". It can be used in plumbing and electrical applications.
1. Use a PVC cutter or hacksaw to cut the CPVC pipe to the desired length.
2. Sand the end of the pipe to remove burrs.
3. Apply a coat of CPVC primer to the outside of the pipe and one end of the fitting.
4. Insert the tube into the fitting and rotate it until it is fully seated.
5 Apply a coat of CPVC cement to the other end of the fitting and connect it to another piece of CPVC pipe or another fitting
CPVC pipes are commonly used in plumbing applications. It is easy to install and versatile. Here are some tips on how to install CPVC pipe.
1. Cut the pipe
Use a hacksaw or PVC cutting tool to cut the CPVC pipe to the desired length. Make sure the incision is straight and clean.
2. Deburring pipe edges
Use file or sandpaper to deburr the edges of the pipes to remove any sharp edges. This will help prevent any damage while handling the pipe.
CPVC pipes are made from chlorinated PVC. This treatment gives PVC better heat and corrosion resistance.
CPVC pipes are made from chlorinated polyvinyl chloride and they are used for hot and cold water distribution.They are easier to install than copper pipes, and they are more resistant to corrosion and scaling.
CPVC pipe is made from PVC that has been treated with chlorination. This process gives the material different properties than regular PVC, making it ideal for cCPVC pipe is more flexible than copper pipe, but not as flexible as regular PVC. It can be used in applications where copper cannot, such as with hot water lines. CPVC can also be used in outdoor applications, as it is not susceptible to corrosion from sunlight or other environmental conditions.
CPVC pipe is available in a variety of diameters and lengths. It can be cut and fitted like regular PVC, but special tools and fittings are required for connections.CPVC pipe is made from PVC that has been chlorinated. This gives it superior resistance to corrosion from chemicals, compared to regular PVC pipe.
CPVC pipes are used in a variety of plumbing and industrial applications. It is often used in residential plumbing as a replacement for copper pipes. It is also used in commercial and industrial settings for various purposes such as carrying chemicals and other liquids.
CONTACT US
Company
zhejiang valtec plumbing
equipment Co., Ltd.
Tel :
Address
No. 121, Hongxing Road, economic and technological development zone,Xiaoshan District,
Hangzhou City, Zhejiang Province P. R. China.
zhejiang valtec plumbing equipment Co., Ltd.