language English >

Application Guide For Angled Thermostatic Radiator Valves

Application guide for angled thermostatic radiator valves

 

1. Make sure the radiator is turned off before beginning work.

2. Unscrew the old valve from the radiator.

3. If there is any water left in the radiator, use a cloth to soak it up before screwing on the new valve.

4. Screw the new valve onto the radiator using a wrench, being careful not to over-tighten it.

 

If you're using PEX tubing, make sure to use pipe dope or teflon tape on all threaded connections to prevent leaks. 

 

5. Turn the water supply back on and bleed the radiator by opening the bleeder valve at the top of the radiator until water comes out and there are no more air bubbles.

 

6. Close the bleeder valve and turn on your heating system

 

Angled thermostatic radiator valves (TRVs) are a fantastic way to control the temperature in your home. By installing them on your radiators, you can ensure that each room is heated to the perfect temperature, without wasting energy.

 

If you're looking for guidance on how to install angled TRVs, this application guide will help you out.

 

How to use angled thermostatic radiator valves

 

Angled thermostatic radiator valves (TRVs) can be used to control the temperature of individual radiators around your home.

 

They work by automatically regulating the flow of hot water to the radiator, depending on the temperature that you have set them at.

 

Here's a step-by-step guide on how to use angled thermostatic radiator valves:

 

1. Start by turning off the power to your boiler. This is usually done by switching off the fuse at your fuse box.

2. Locate the TRV that you want to adjust and remove the cap.

3. Use a flathead screwdriver to turn the knob on the TRV clockwise or counterclockwise, depending on whether you want to increase or decrease the temperature.

4. Once you've set the temperature, replace the cap and turn the power back on to your boiler.

 

Angled thermostatic radiator valves (TRVs) are a great way to improve the efficiency of your heating system. By using these valves, you can control the temperature of each individual radiator in your home. This allows you to heat only the rooms that you are using, which can save you money on your energy bills.

 

There are two types of angled thermostatic radiator valves: manual and automatic. Manual angled thermostatic radiator valves

require you to adjust the temperature yourself, while automatic angled thermostatic radiator valves

will do it for you. Automatic TRVs are more expensive, but they are worth the investment if you want to save money on your energy bills.

CONTACT US

zhejiang valtec plumbing equipment Co., Ltd.

SUPPORT BY HANGZHOU GREAT MASTER